1. Templates
  2. Cleaning Services
  3. Chimney Sweeping
  4. Smoke & CO Safety Check Enquiry Form

Smoke & CO Safety Check Enquiry Form

A fire-safety template — appliance, alarms and concerns captured, so a solid-fuel setup is checked for safe draw and carbon-monoxide risk.

Description

A solid-fuel fire is wonderful until it isn’t venting properly — and carbon monoxide gives no warning without an alarm. This form scopes a smoke and carbon-monoxide safety check, so a household can have their fireplace or stove checked for safe draw and get the right CO alarm protection in place. It captures what a safety check needs: the appliance and fuel, whether a working CO alarm is already fitted, any warning signs (headaches when the fire’s lit, staining above the appliance, smoke lingering), and whether a smoke-draw test is wanted. The sweep checks the flue draws and vents safely, confirms ventilation, and advises on CO alarm placement — the single most important protection. Put it on your “fire safety” page. Free, brandable, and it turns an unchecked solid-fuel setup into a tested, CO-protected one.

Form fields

Everything the Smoke & CO Safety Check Enquiry Form above collects — 8 fields across 2 pages, so you can see exactly what it captures before you make it your own.

Smoke & CO Safety Check

  • Your postcode

    Short Answer Icon
    Short Answer
  • Appliance

    Single-Select Icon
    Single-Select
  • Working CO alarm fitted?

    Single-Select Icon
    Single-Select
  • Any warning signs?

    Multi-Select Icon
    Multi-Select
  • Would you like a smoke-draw test?

    Yes/No Icon
    Yes/No

Your details

  • Your name

    Name Icon
    Name
  • Contact number

    Telephone Icon
    Telephone
  • Email address

    Email Icon
    Email
Use Template Arrow Right Icon

Template FAQs

Common questions about the Smoke & CO Safety Check Enquiry Form — what it captures, when to use it, and how to make it your own.

Why is carbon monoxide a risk with solid fuel?

Because a poorly drawing or blocked flue can push combustion gases — including carbon monoxide — back into the room. CO is colorless and odorless, so a working alarm is essential; a safety check confirms the flue vents as it should.

Do I need a CO alarm?

Yes — a working carbon-monoxide alarm is essential with any solid-fuel appliance, and required in many rented homes. The form asks whether you’ve got one; if not, we’ll advise on the right type and where to site it.

What are the warning signs?

Headaches, dizziness or nausea when the fire’s lit, staining or soot marks above the appliance, smoke lingering in the room, or a fire that won’t draw. If you notice these, stop using the fire and get it checked — note them on the form.

What does the check involve?

Checking the flue draws and vents safely, confirming there’s adequate ventilation for the appliance, looking for signs of spillage, and a smoke-draw test if wanted — plus advice on CO alarm placement. You get a clear picture of whether it’s safe to use.

Can you do this with a sweep?

Yes — a safety check pairs naturally with a sweep, since a clean flue is part of safe venting. Mention it when booking and we’ll do both in the one visit.

Is the enquiry free?

Yes — free with a Fun Forms account, fully customizable, and it embeds on your site or shares as a link.